Gradients are variations in a single color’s hues, tints, or tones. You may mix colors or give vector objects depth and light by utilizing gradients in your design. So, how do you save a gradient in Illustrator? 

To save a gradient in Illustrator, you need to add it to the Swatches. First, access the Swatches panel by navigating to Window> Swatches. Choose the gradient and select the New Swatch button. Then, name your gradient and click OK.  

Keep reading below for more information.

How To Make A Gradient In Illustrator

Before we go ahead, we first need to learn how to create a gradient in Illustrator. Follow the simple steps listed in this section to find out how.

Step 1: Open Gradient Panel

Access to the Gradient panel is required before you can develop a gradient. 

• This ought to be available on the right-hand toolbar. Additionally, you may get to this by selecting Window > Gradient.

Step 2: Add Gradient to Object

By design, when you initially click in the Gradient window, a white and black gradient is chosen (if not, the recently used gradient will be applied per standard). 

• To add a gradient to an object, first choose the object on which you would like to add the gradient by clicking on it. 
• Next, click anywhere within the Gradient window on the Gradient Box or Gradient Bar.

The gradient will instantly be applied to the object as a result. You may alter the gradient of the chosen item by modifying the gradient’s appearance in the Gradient window.

Step 3: Set the Colors

• Double-click any color stops beneath the gradient bar to set the gradient’s colors. This will give you more alternatives for selecting a color. 
• When you select a color, the gradient will instantly receive its application.

Step 4: Choose Ending Color

• Choose an ending color by selecting the color stop button located to the right of the bar.

Step 5: Change Positions

After the colors have been established, you can change the starting or end point’s position. The gradient’s appearance and smoothness will alter. 

• Select and drag the color stop left or right until you feel satisfied with the outcome.
• You may also change the midpoint’s location, which will further alter the gradient’s appearance (represented by the diamond icon). At this point, the gradient shows an equal mixture of the starting and finishing hues. 

Drag the diamond in any direction.

Step 7: Add More Colors

You may extend your gradient by using more colors. 

• Click to add another color stop underneath the gradient bar for this to happen. 
• As you did before, pick a color, then use the mouse to click and drag a spot for the color stop.
• To make more color stops, use the same procedure again.

Step 8: Eliminate Unwanted Color Stops

• Drag the color stop downwards or click and hold it while dragging it to the left to eliminate a color stop.

Step 9: Change Angle

• You can change the gradient’s angle by typing a value or selecting one from the Angle Dropbox.

When you choose an object, the angle is immediately applied.

Step 10: Change Opacity

• Click on a color stop and utilize the Opacity Dropbox located below the Gradient Bar to change the opacity of that color stop. 
• The Opacity slider in the control panel may be moved, or you may input a value inside the field.
• When the level is less than 100%, the opacity of a color is shown as a striped pattern.

Step 11: Select Gradient Type

• You may also select the gradient type by selecting any of the choices at the gradient panel’s top.

How to Save an Illustrator Gradient

Follow the steps listed in this section to save a gradient in Illustrator. 

For more information on how to save a gradient in Illustrator, watch this video below:

Step 1: Access Swatches Panel

• You must include a new gradient in the swatches in order to keep it. Access the Swatches panel by choosing Window > Swatches.

Step 2: Add Gradient

• Select the New Swatch button while the gradient is still chosen.

Step 3: Name Swatch

• In the pop-up box, give the swatch a name and press OK. This will produce a fresh swatch containing the gradient you just made. 
• The gradient fill box from the Gradient panel may also be clicked and moved to the Swatches panel.

Your new swatches will be added to the list at the bottom.

Step 4: Save

• Click the library icon in the lower left corner and choose Save Swatches to save the swatch library. Click Save after entering a file name. 

This will store your existing swatch library in Illustrator’s standard folder, but you may choose a different location if you would like to do so.

Conclusion

And there you go! You’ve finished the tutorial with success. We sincerely hope you found the instructions in this tutorial useful and that you learned a lot of new techniques you can apply to your next artwork and ideas.

Adobe Illustrator stores documents in AI format, per the standard. This is excellent when completing projects or storing a backup file of your work. But you will be required to save it in various formats, such as JPEG, PNG, or SVG, when printing or publishing the completed output, uploading it online, or importing it into other applications. So, how do you save an Illustrator file as a JPEG?

You can use one of two ways to save an Illustrator file as a JPEG: the Save for Web option or the Screens Export option. It must be mentioned that you will have more control over the quality when using the Save for Web option.

Keep reading below for more information.

Saving Artboards in Adobe Illustrator

It’s crucial to understand how Adobe Illustrator processes artboards and how you can save them as independent files when we look at how to save files in certain formats.

Inside an Illustrator file, artboards resemble separate pages. You may save them as individual photos or merge them into a single artwork. Normally, you are prompted with an artboard handling question when you save an Illustrator file. Your choice will have an impact on the appearance of your exported image.

Most of the time, you choose using the File > Export > Export As menu option. What you should do in such situations is as follows:

1. Check the Use Artboards option if you wish to save several artboards as independent files. After that, you can either choose All to save all of the artboards or input a Range (such as 2-4) to save only a certain set of artboards.
2. Check the Use Artboards option if you have items extending beyond an artboard (for example, if they overlap the border). This will make sure that the remainder of the image is cropped off and that your resulting image just has the contents of the artboard.
3. Simply uncheck the Use Artboards option if all of the content is contained within the artboard and you only have just one. This will result in an image with all white space eliminated and cropped to the boundaries of the objects included inside it. This is very useful for producing objects that are square or rectangular in shape.

How To Save Illustrator File As JPEG

You can do this in two ways. We have covered both of these methods in this section.

For more information on how to save an Illustrator file as a JPEG, watch this video below:

Method 1: Save for Web

You are limited to saving one artboard at a time with this option. The photo’s resolution will be more in your hands, though.

1. Choose the artboard you want to save by clicking on the image on that artboard.
2. Select File > Export > Save for Web (Legacy)
3. You’ll see a dialogue window. Choose JPEG and set the quality to 60%. Make sure “Progressive” is ticked in the checkbox.

(Progressive implies that when you initially access your website, it will display a pixel-dense thumbnail of the entire image, gradually getting sharper as the page runs. If not, the image will load in full quality but one bar of data at a time.)

1. Whenever you save an image, make sure its size is approximately 100K or less. You may be required to reduce the quality to 50% if it is too large.
2. Select “Save.” After selecting a location to store the image, click Save once again.

Method 2: Screens Export

The desktop/mobile versions of banners or numerous icons may be saved more quickly with this option since it enables you to save more than one artboard at once. The quality of your images will be less within your control.

1. Navigate to the “File” menu and click on “Export” > “Export for Screens”
2. You’ll see a dialogue window. By clicking on the preview of the artboards on the left, you may deselect any that you do not wish to keep from your work.
3. By selecting the folder icon, you can choose the location where you want to save the photographs. Go to format and choose JPG 50. After that, click the settings button.
4. The settings button will open a new dialogue box once you click on it. To switch the compression method to progressive, once more choose JPG 50 from the selection on the left. Click the Save Settings button.
5. The directory where you stored your photos will immediately open when you click Export Artboard to save. Your settings and save location will be retained for future uses of Export for Screens.

Conclusion

It’s really simple and quick to save an Adobe Illustrator file as a jpeg. You may test out the two approaches to determine which works best for you. We hope this post was able to help you with your image-saving issue.

One of the most commonly used file formats on the internet nowadays is JPEG. It is the one that is ideal for photographs of all types and dimensions. You can convert images and other documents to the JPEG format across every image editing application, but how does Affinity Photo do it?

To save an Affinity Photo file as JPEG, you must navigate to the File menu, click Export, select JPEG from the list of options, and then choose the destination folder for the JPEG file.

Keep reading below for more information.

About Affinity Photo

Affinity Photo is a graphic design tool that supports centralized image editing for digital artists. Artists may blend high dynamic range (HDR) photographs, add copyright information to images, change metadata, and do image rendering.

Professionals may edit Photoshop document (PSD) files, fix color casts, and add filters in single layers or many layers using Affinity Photo. Designers may erase imperfections or undesired elements from images by using the magical inpainting brush or patch removal resources. 

Users may also utilize the focus stacking feature to merge numerous shots and obtain a preview of altered images.

With the use of Affinity Photo, photographers may modify the exposure and white balance of their photographs and delete particular areas. Pricing is accessible as a one-time license, and support is provided through online resources, phone, email, and other channels.

Affinity Photo vs. Photoshop

It’s crucial to keep in mind that there are many perfect applications for everyone when comparing Affinity Photo with Photoshop. Most photographers can use one of these two very competent picture editors. 

They generally work quite well for photographers, but each offers benefits, limitations, and quite distinct price structures.

Therefore, try not to view this as a binary decision or even a contest. What matters is which software best meets your needs, not which program is superior.

Is Photoshop quicker than Affinity Photo? No, never. Affinity Photo utilizes substantially less RAM and VRAM and the majority of its filters are quicker. Additionally, Affinity Photo has several techniques up its sleeve to help the user interface “feel” quicker (not actually faster).

The Camera Raw Editor, which is far quicker and more fluid than Affinity Photo’s Develop Persona, is one area where Photoshop still dominates. Additionally, Photoshop starts up more quickly, by a few seconds.

Affinity Photo will seem quicker on older PCs with 4GB of RAM or less since it requires less resources. The speed advantage of Affinity Photo on faster PCs with 8GB of RAM or greater is negligible and shouldn’t be the determining factor when selecting Affinity Photo. Rather, focus on factors like functionality, cost, and how well it fits into your workflow.

It’s impossible to deny the complexity and feature-richness of Affinity Photo and Photoshop, which naturally results in a very high learning curve when learning how to work with them. Additionally, Photoshop allows you to edit 3D files and even video, both of which need additional training and expertise to get the finest results.

What is a JPEG File?

The format was defined by a global body known as JPEG—Joint Photographic Experts Group—during the late 1980s and early 1990s. It has become the standard file type for digital photographs since photographers started taking and storing pictures on digital photography and other reproduction tools.

The lossy compression method used by JPEG files allows for up to 24-bit color support and more convenient image storage and transmission. This could improve JPEGs for general usage, but it also means giving up part of the original image quality.

When is a JPEG File Used?

While still being very modest in size, a JPEG file may display 16.8 million colors. It is the preferred file for both photographers and online publishers because of this reason.

Presentation of Photographs

Photographers frequently post the results of their work online in JPEG format even though they typically capture in raw format to achieve the most precise depiction of an image possible. Because of the decreased size, it will load more quickly on most browsers (including mobile) without significantly lowering quality.

Online Publication

JPEG files are advantageous for everyone, from publishing companies to content creators. JPEGs don’t require additional cloud storage space, and faster page loads allow viewers quicker access to material.

How to Save an Affinity Photo File as JPEG

The program makes it simple to save your Affinity Photo files as JPEG. Just follow the steps listed in this section below, and you’ll get there in no time.

For more information on how to save Affinity File as JPEG, watch this video below:

1. Navigate to the File menu.
2. Scroll down to Export.
3. Select JPEG as the file format.
4. Decide and select the location where you want to store your JPEG file.
5. Give your file a name.
6. Click OK.

Conclusion

And there you go. Your Affinity Photo file has now been successfully stored as a JPEG and is available for use whenever and wherever you wish. We hope the instructions in this article are easy to understand and follow.

Are rectangles too bland? Are shapes with edges not appealing to you anymore? Well, maneuver the corners, then! We touch upon how to round the corners in InDesign in this article.

To round corners in InDesign, select the shape, go to Object, and then Corner Options. In the window that opens, choose Rounded after clicking on the arrow next to the corner icon. Click OK. 

To continue further, keep reading. 

How Can You Maneuver Corners?

InDesign allows you to create variation in your document by adding shapes with visually appealing corners. This may help in gaining the viewers’ attention and passing on a message. 

The six options for altering corners are default, fancy, bevel, inset, inverse rounded, and rounded. We shall discuss the latter five effects briefly. 

Fancy

Using fancy corners for your box creates an intricate design on the corners. This looks like the line took a different path, made a few turns, and joined the line again. Looking at a visual representation of this might help you understand this further. 

Bevel

As the name suggests, these corners are beveled. That is they turn at the corner and make sharp horizontal edges. Again, go to InDesign and try this out for a better understanding. 

Inset

If you use an inset on a square, it will make it resemble a cross. The corners fold in on themselves.

Inverse Rounded

The name is quite self-explanatory. The corners turn inside to form a curve on the inside. 

Rounded

The corners are rounded on the outside, creating no sharp edges. We will be learning how to make these in this article. 

Making Round Corners In Indesign

To make your shapes look less stark while still attracting attention, rounded corners are a great way to achieve that. 

To make your corners round in InDesign:

1. Open up the document containing the cornered shape that needs to be altered.
2. Select the shape and then go to the menu at the top of the window. 
3. Here, go to Object. 
4. In the drop-down menu, go to Corner Options. 
5. A window will appear. Look for the Preview option at the bottom and place a checkmark next to it. Whatever changes you make in this window, they will show in the document. 
6. In this window, you will see separate sections for each corner of your shape. If you have a rectangle, you will see four sections. Each section is dedicated to altering one corner.
7. The corners are linked together by default. 
8. Go to any of the sections and click the arrow next to the icon showing the corner. 
9. Here, choose Rounded.
10. All the corners will be rounded. 
11. Hit OK. 

Watch this for more assistance:

How To Change Roundness Of Corners In Indesign

InDesign has a default setting according to which the corners are rounded. However, this may be something other than your preference. To change this to your liking, follow the instructions below. 

1. Select the shape that needs rounding. 
2. Go to Object in the top panel, and then choose Corner Options. 
3. In the window that appears, you will see sections dedicated to each corner of the shape you are working with. 
4. Link all the corners by clicking on the linking icon in the center. The icon should not have a line going through it. 
5. Once you have chosen the rounded corner, you must move on to the numbers. 
6. You can choose the number of millimeters where the corner is rounded. 
7. Numbers can be put in manually. 
8. Once done, hit OK.

How To Round Selected Corners

Create some designs with the corners. A good way to do this is to maneuver each corner separately. Look at the instructions below to round selected corners instead of all. 

1. Select the shape that needs rounding. 
2. Go to Object in the top panel, and then choose Corner Options. 
3. In the window that appears, you will see sections dedicated to each corner of the shape you are working with. 
4. Look for the linking icon in the middle of these sections. Turn this off. 
5. The icon should have a line crossed on it to confirm unlinking. 
6. The unlinking allows you to work with each corner separately. 
7. You can select the corner you want to change and change its roundness to what you wish. 
8. While you do this, the rest of the corners will stay unchanged. 
9. Once you are done, click OK. 

Conclusion

We bet you never thought corners could be this versatile and offer so much in design. Well, you know it now. Stay in touch with us to find interesting information like this and learn how to perform complicated tasks easily, like rounding the corners of your shape.

Do you need help with how you can shade in Krita? We have got you covered. This article deep dives into how to add shadows and highlights on an object in Krita.

To add a shadow, choose the right brush and color. Moreover, you need to add mask layers for shadows and highlights. After adding the shadows and highlights, fix all the mistakes to give your image a cohesive look. 

To go further into all these steps, continue reading to learn. 

For help apart from this article, refer to this video:

Choose The Brush

The first thing you need to do is choose an adequate brush. To do so:

1. Open a new file in which you want to make the image.
2. In the tools panel on the left, choose the Brush Tool. 
3. In the panel that displays on top, go to the Brush Selection option.
4. In the window that opens, choose the brush you would like to use for shading. 

We recommend using an airbrush tool as it gives a soft effect to the shadows. 

Choose The Right Color For Shading

Often people use black to add shadows, but we are strictly against it. Below are some rules and tips you should adhere to get the best results. 

1. Do not use black to shade because it will never give you the desired effect. 
2. Instead, choose a slightly darker shade of the color you have your object in. 
3. You can do this by using the color picker tool on the window’s right side. 
4. Go to the color picker. On the triangle, move the circle a little upwards. 

Take your time here and find the perfect shade until you proceed. 

Create A Mask Layer

You do not want to shade over your object, making creating a separate mask layer important. This would also help when making fixes or tweaks so you do not accidentally erase the object. 

To create a mask layer:

1. Go to the layers panel on the right side of your window. 
2. Right-click on the layer with the object in it. In the drop-down menu, choose Group and then Quick Clipping Group.
3. The mask layer will show up in the layers panel. 

Figure Out The Light Source

You need to figure out where the light comes from and where the shadow falls. 

Decide the direction from which the sun or the light source would fall on the object. 

You can create a new layer and then draw the light source to understand better how the highlights and shadows will work. 

Highlight The Area Where The Light Hits

There are no shadows without highlights. 

1. To highlight the area where the light hits:
2. Go to the color picker and choose the color lighter than the object’s color.
3. You can move to the lower end of the triangle. 
4. You can also choose a color that is close to yellow. 
5. This depends on how much light you wish to show. 
6. Once decided, go in with the brush lightly on the area where you want the light to hit. 
7. When you are done with highlighting, go to the layers panel.
8. Under Layers, look for a box that says Normal.
9. Click on this, and from the drop-down menu, choose Overlay. 

This smooths out the shading. 

Make A Shadow 

Now let’s make a shadow. 

1. Create a new mask layer for the shadow. 
2. Please choose the color that we talked about in the second step.
3. Using this dark color, repeatedly click at the bottom or in the direction where you wish to add the shadow. 
4. From the tools panel, choose the group tool, which looks like a square with borders. 
5. Now select the shadow.
6. Press and hold the control or command key and drag the handles on the shadow sideways or downwards, depending on the direction. 
7. This will make the shadow symmetrical.
8. Now move it around to adjust according to your object. 
9. Place it very close to the object. 
10. Now reduce the Opacity from the Layers panel.

Then go to the box that says Normal, and in the drop-down menu, choose Overlay. 

Fix Mistakes

To end it fix any mistakes or errors that you see. 

1. Select the layer on which you want to fix the mistake. 
2. Go to this layer, select the Eraser tool, and lightly move it around the area of concern. 
3. Change layers as you like.

You can add more shadows if you accidentally erased more than you needed to. 

Conclusion

Adding shadows can be tricky, but we have attempted to bring you the most basic technique with the easiest tools. You would not have to worry much about the tools but focus more on the technique of using the brush on the canvas.

You’re working on a project, and although it’s almost finished, some of the objects you’ve created still have a few rough edges here and there. What options do you have? This may seem like a simple task to some, but for many individuals who are just starting out with Illustrator, it may be rather difficult.

In Illustrator, there are three techniques to soften an object’s corners. You may utilize the Simplify Window, the Sub-selection tool, or the Smooth tool to soften an edge. To take advantage of the smooth tool, after enabling the Selection tool by pressing “V” on your keyboard, click the item you want to choose. Select the smooth tool. Then, drag the Smooth tool along the line of the object you wish to smooth.

All three of these methods have been discussed in detail in this article. Keep reading below for more information.

How to Smooth Edges in Illustrator

You can smooth edges in three ways, and we’ve discussed these in detail below.

For more information on how to smooth edges in Illustrator, watch this video:

Using the Smooth Tool

By instantly smoothing the edge for you, the Smooth tool enables you to remove a sharp edge or line with a single mouse drag.

Step 1: Locate and Choose the Selection Tool

• The Selection tool may be found on the sidebar to the left of the window. The tool may also be quickly selected by using the “V” keyboard shortcut.

Step 2: Choose Your Object

• To pick your object, click the selection tool. It should have a border that is outlined around it.

Step 3: Locate and Choose the Smooth Tool

• Right-click on the Shaper tool in the menu on the left side of the screen, then select the Smooth tool icon to activate it. 

All of the anchor points on the border surrounding your chosen item will be outlined and accessible while the smooth tool is active.

Step 4: Make Your Shape’s Edges Smooth

• The edge portion you wish to smooth out may be identified by clicking and dragging the Smooth tool over it. Drag the tool over this region repeatedly until the desired outcome is obtained.

Using the Sub-selection Tool

Individual anchor points, the pathways that link them, and the curvature of these paths may all be chosen and changed using the Sub-selection tool.

Step 1: Locate the Selection Tool and Choose It

• Search for the Selection tool on the menu at the left of your window. Alternatively, you may quickly pick the tool using the “V” keyboard shortcut.

Step 2: Choose Your Object

• To pick your object, click the selection tool. It should have a border that is outlined around it.

Step 3: Locate and Choose the Sub-Selection Tool

• Look for the Sub-selection tool on the menu on the left end of the display. You may quickly pick the tool by pressing “A” on the keyboard as a workaround.

Step 4: Decide Which Anchor Points to Use

• Choose the anchor point that is closest to the edge you wish to smooth using the Sub-selection tool. 

The anchor point will be highlighted after being chosen, while the surrounding areas stay white. Holding down the “Shift” key while clicking on each anchor point allows you to choose more than one.

Step 5: Make Any Necessary Adjustments to the Shape’s Edges

• You may now change the geometry of your object by adjusting the anchor points and any connecting paths. 

Any curved line’s curvature may be altered using the anchor handles linked to the line’s anchor points.

Using the Simplify Window

You can also use this technique to smooth edges in Illustrator. Follow the instructions below.

Step 1: Locate and Choose the Selection Tool

• Search for the Selection tool on the menu at the left of the window. You may quickly pick the tool by using the “V” keyboard shortcut as a workaround.

Step 2: Pick Your Object 

• To pick your object, click the selection tool. It should then have a border that is outlined around it.

Step 3: Launch the Simplify Window

• Select “Object,” then “Path,” then “Simplify…” from the panel at the top of the page. A little toolbar with a slider and two icons will appear on the screen.

Step 4: Modify Your Shape 

• Adjust the number of anchor points surrounding your object using the slider on the Simplify panel. 
• Additionally, you may choose to have Illustrator automatically determine the value by selecting the “Auto-Simplify” button, or you can choose to open a box with additional modification choices by selecting the “More Options” symbol.

Conclusion

If you want your designs to look clean and professional, you need to know how to smoothen the edges of your objects in Illustrator. This is why we developed this tutorial to guide designers who don’t know how to do this yet. Happy editing!

Slanting text is one of the text-manipulation techniques available in Photoshop. You’ve come to the right place if you’re looking for simple, quick, and effective methods to tilt or slant your text. We’ll demonstrate three different ways to slant text in Photoshop in just a few easy steps.

Text can be angled via three different ways. You can tilt your text with a free transform for the first method. If not, you can rotate the text layer to slant your text. The last method involves creating italicized text.

Keep reading below for more information.

How to Slant Text in Photoshop

You can slant text in Photoshop in three ways, and we will discuss each of these in this section.

For more information on how to slant text in Photoshop, watch this video below:

Option 1: Using Free Transform to Slant Your Text

To give your text a slant in this first method, you will essentially skew it. This is the fastest and easiest approach to slant your text.

The key benefit of this approach is that because the slanted effect is applied directly to the text layer, you are not required to rasterize it for it to function. As a result, you may alter your text whenever you want by simply turning on the Type Tool (T) and making any desired changes to the typeface.

There are some disadvantages to this strategy in addition to its benefits. For instance, it may be difficult to pinpoint the precise angle at which the text is slanted, which may result in undesirable results. The second option demonstrates a more exact method of text tilt.

Step 1: Add Your Text

• Start by writing your text. Activate the Type Tool (T) from the Toolbar for this purpose.

Step 2: Turn on the Skew and Free Transform Tools

1. Press Control + T (Windows) or Command + T (Mac) to activate the Free Transform Tool at this stage You may also select Edit > Free Transform.
2. A bounding box will be created around the text as a result.
3. Right-click the text and then select Skew.

Step 3: Adjust the Anchor Points

1. Now, in the text field, select the center anchor point. Either the anchor point on the right or left side of the bounding box may serve as the starting point.
2. Next, raise or lower the midway point. Drag the center point upwards if you would like the text to be inclined upwards.
3. Drag the center point downward to make your text tilt downward.
4. Your text will get more tilted the further you drag the mouse upward or downward. Keep in mind that too much text slanted might make it difficult to read.
5. Once you’re done, hit Enter on your keyboard. Thus, the Free Transform Tool will be disabled.

Option 2: Rotate the text layer to slant your text

This method involves rotating the letters to create an angle. With this technique, you may slant your text while maintaining control over its slanted angle. 

This is the best option when you merely want a diagonal text and don’t want the characters of your text to be distorted.

 Step 1: Write the Text and Activate the Transform Tool

1. As was demonstrated in the last portion of this tutorial, after creating the text, you must turn on the Free Transform Tool by hitting Control + T (Windows) or Command + T (Mac).
2. Your text will be surrounded by anchor points.

Step 2: Change the Text

1. Once your cursor changes to a double-curved arrow, move it across the text’s corner.
2. Next, whilst holding Shift, slide the text upward or downward. Your text turns by 15 degrees at a time while holding down the Shift key. If you want to create a flawless diagonal text, you may continue to hold Shift and drag the text upward or downward until it is slanted at a 45-degree angle.
3. When completed, press Enter to turn off the Free Transform Tool.

Option 3: Using Italics to Create Tilted Effect

Your text will instantly seem slanted if you select the Italic text style. Even if your font doesn’t come with an italic variant, you can make any text italic with Photoshop. How? Read on.

Step 1: Enter Your Text Into The Canvas

• As was seen in the previous section, start by creating your text. There are two methods for making your text italic, as you’ll see in the section below.

Step 2: Check Whether Your Font Has an Italic Version

1. To use the first option, you must confirm that your typeface has an italic font style. Double-click the text to highlight it.
2. Then select Italic as the font style from the Options menu.
3. Your content will be bolded and skew upward.

Step 3: Produce a Fake Italic Effect

1. Don’t worry if your font doesn’t have an italic variant; you can easily convert it to italic in Photoshop. Write and highlight the text as shown above before you can do this.
2. After that, select Window > Character.
3. Select the Faux Italic option in the Characters section.
4. Your text will become italic as soon as you do this.
5. Remember that the results will only sometimes be ideal as this is a manual method of turning a text italic.
6. When you’re done, press Enter on your keyboard.

Conclusion

It’s crucial to consider if you actually want to slant text in Photoshop now that you understand how to accomplish it. If you are tilting text to fit the angle in an existing image, that is OK. However, if you are tilting text for the purpose of designing it, we strongly advise you to think again. It could have a better effect on the reading and legibility of writing.

Understanding how text may be skewed in Illustrator to get the appropriate appearance is crucial when dealing with text. There are several methods for skewing text, and each has advantages and disadvantages of its own.

You can easily skew text in Illustrator by any one of the three methods discussed in this article; which includes using the shear tool, using the shear dialog, or by using the rotate tool.

Keep reading for more information.

How To Skew Text In Illustrator

You can skew text in Illustrator via three methods, all of which are discussed in this section.

For more information on how to skew text in Illustrator, watch this video below:

Using the Shear Tool

Follow the steps below to use the shear tool for skewing text.

Step 1: Select Text

1. The “Selection Tool” may be found in the Tools panel; alternatively, you can hit “V” and then click the text item you wish to skew. 
2. Click “Windows” and then “Tools” to reveal the Tools menu if you can’t see it. 
3. By selecting the circle on the relevant layer or sublayer, you may also choose the text from the Layers panel. 

The Shearing Tool runs on properly formatted text objects, so you are not required to change the text object beforehand, such as by transforming it to outlines.

Step 2: Select Shearing Tool

1. From the Tools panel, select the “Shearing Tool.” 
2. You may be required to click and hold the “Scale Tool” to view the Shearing Tool option because by default, it is hidden below the Scale Tool.

Step 3: Position Anchor Points

1. To position the anchor, simply click anywhere within the current document. The anchor’s distance from the text object’s horizontal or vertical center determines how much the horizontal and vertical shearing shift compared to this point, with a closer anchor indicating a somewhat more subtle skew. 
2. Place the anchor towards the middle or leave it out altogether for dramatic effects. Without an anchor, the text object’s vertical and horizontal centers are taken into consideration.

Step 4: Skew Text

• To skew the text left or right, drag it horizontally while holding down the “Shift” key. 

This will keep the text’s natural height. Holding down the “Shift” key will keep the text’s normal width as you drag the mouse cursor vertically to slant it.

Using the Shear Dialog

Step 1: Use Shear Tool

1. Double-click the “Shear” Tool to launch the Shear window after selecting the text that you wish to distort. 
2. Similarly, you may shear the text by selecting it with the right-click menu after selecting “Transform.” 
3. You may also select “Transform” and afterwards “Shear” by clicking “Object” in the top menu.

Step 2: Check Preview

• For a real-time demonstration of the shearing result as you input values, select “Preview.”  This selection is not made by default.

Step 3: Add Shear Angle 

• Fill out the “Shear Angle” section with a value within -359 and 359 degrees. This figure indicates the angle of tilt off the shear axis in relation to a perpendicular line.

Step 4: Transfer Shear Angle to Axis

1. To transfer the shear angle to the proper axis, choose “Horizontal” or “Vertical.” 
2. As another option, to vary the shear angle by that many degrees off the horizontal axis, specify a number between -359 and 359 inside the Axis Angle box.

Step 5: Apply Shearing Effect

1. To use the shearing effect, click “OK”. 
2. Alternatively, you can select “Copy” to make a distorted copy of the text while leaving the original content intact.

Using Rotate Tool

Honestly, the Rotate Tool (keyboard shortcut R) skews text just as well as the Shear Tool.

1. Following the addition of text to the artboard, select the Rotate Tool from the toolbar. To adjust the text’s layout, either manually enter the angle or click and drag over the text.
2. An anchor point will appear on the text if you use the Rotate Tool, much like when you use the Shear Tool. The rotation anchor may be moved by clicking on the text, and the text can also be rotated by clicking and dragging.
3. For instance, if you click on a letter’s middle region and drag it, the text will rotate in accordance to that anchor point.
4. Double click on the Rotate Tool to specify the rotate angle directly.

Things to Keep in Mind Before Skewing Text

It’s critical to be mindful of the following while skewing text:

1. Text that has been skewed might have a different meaning.
2. Skewed text can have a different look.
3. Text that has been skewered may have a different arrangement.

Thus, skewing text in Illustrator may have unforeseen and unfavorable outcomes. When skewing text, proceed with caution and think about different ways to get the desired result.

Conclusion

Although Adobe Illustrator doesn’t have a dedicated skew tool, you may simply skew text using the Shear Tool or Rotate Tool. Try to avoid dragging excessively when skewing text utilizing the Shear Tool so as to avoid distorting it.

We all know that one of the most important parts of working on any project is to be able to create layers. Having different layers allows you to adjust and change how objects look and apply effects and transformations with ease. In Photoshop, all new objects become new layers – when using Adobe Illustrator, that is not always the case.

Many users wonder how to separate objects out if they forget to make them into a new layer. Luckily, this is a simple process you can complete in just a few steps. There is a built-in function within Adobe Illustrator that allows you to separate the group of objects into their own distinct layer, even if you forgot to make new layers manually.

If you want to learn how this process works, you are in the right place! Keep reading this article for more information on how layers work in Adobe Illustrator, why you need to make manual changes to the layers, and of course, how you can separate layers if you accidentally create objects within the same layer. Let’s get started!

Creating Separate Layers In Adobe Illustrator

It’s a common mistake. You are almost done with your new Illustrator project and then realize you forgot to add layers! If you are working on Illustrator, you may have noticed that layers are created manually instead of automatically, like on some other software such as Photoshop. 

If that is the case, what can you do?

While it may seem like a huge mistake you can’t reverse, there is still one way that you can still separate layers on Adobe Illustrator. 

To do so, you will need to follow a simple two-step process. So, if you are ready to get started, follow the instructions below!

1. Launch Illustrator on your device of preference.
2. Now, open up the project you want to separate into different layers.
3. Click on the Windows menu from the top bar on Illustrator.
4. From here, choose the option ‘Layers’ to open up the Layer Menu.
5. Select the layer containing all the objects you want to separate out.
6. Now, choose the option ‘Release to layers (sequence).’
7. All of the groups under your layer will become layers.
8. Since these layers are still grouped under the main layer, you will need to separate them out. Click and drag all of the layers from outside the grouping.
9. Once all the layers are removed from the original one, it will become an empty layer.
10. You can now delete this layer.

As you will note, there will now be distinct layers for each object you used in your Adobe Illustrator project. This will give you the chance to apply specific changes to each layer without disturbing the rest of the work. 

Drag Method To Separate Objects To A New Layer

There is also another method that you can use to create a separate layer, especially on just one object at a time. This method will allow you to carefully select just one or two elements from your graphics and move them to a new layer! Here’s how you can do this:

1. Create a new layer over the existing layer that you have in your document.
2. Select the object that you want to move from your original layer. 
3. When you select the object, the layer will have a blue marker within the Layers panel to indicate that an object has been selected.
4. Now, simply drag the blue marker over to the same area on the new layer.
5. The object will remain in the same position but be moved to another layer.

This method is helpful in two ways – it helps to keep the object in the same position (which is difficult to achieve when you use the copy-paste method) and it also helps you quickly move one or two objects instead of separating out the entire layer. 

If you want to see how this process works in action, make sure to watch this excellent video tutorial about how to create separate layers using Adobe Illustrator:

Final Thoughts

Creating new layers is a manual process on Illustrator, but you can still make it happen after the fact in just a few steps! We hope this article helped you solve your problem!

Rotating text can sometimes be necessary when using Clip Studio Paint. Many artists use this software to create comics, and those necessitate the ability to be flexible with text orientation, as this allows the text to be readable but still introduces some intrigue. But if that is the case, how can you make text rotate in Clip Studio Paint?

You can use the built-in Rotate tool available in Clip Studio Paint to change how text is aligned. The tool can rotate the text across the center at a specific angle or point. There are different ways to select this angle, as you will explore if you follow this tutorial for Clip Studio Paint in depth. 

Now that you know how things work, you must read this article for more in-depth information! Join us as we explore what you need to do to rotate a text layer in Clip Studio Paint, and how you can use the flipping effect to get an equally interesting result! Keep reading this article for more information!

Rotating Text With Clip Studio Paint

Before we start learning how to rotate text on Clip Studio Paint, you should know how the basic tool at work here – the Type Tool – works. This tool is the built-in tool that you use to enter in text to a new layer. 

Here is an introduction to the Type Tool on Clip Studio paint, along with some changes you can make to the text in the software. If you want to learn more about this fascinating aspect of the software, here is the video tutorial you need to watch:

Now that you understand this part of the tutorial let’s understand rotation. Rotation allows you to move a text box along an anchor point (typically in the center) at a specific angle. On Clip Studio Paint, you will need to follow these steps:

1. Launch the software and open up a new file.
2. Now, type in some text using the Type Tool.
3. Select the text bounding box. 
4. Click the rotation handle of the box to rotate text.
5. Move in your desired direction, and then release the box to make a change.

Your text will now be rotated! However, there are some things to remember as you do this! For example, in some cases, the rotation handle will not appear. 

In this case, you can choose any of the options in the ‘Tool Property Palette’ to trigger it to appear.

You can also make specific rotation changes by holding down the shift key. This allows the rotation to happen at intervals of exactly 45 degrees, which is a great way to keep rotation consistent amongst different elements within the same project. 

However, you can also keep the angle consistent using the ‘Sub Tool Detail Palette.’ Here, you can enter a specific value that you want the angle to be, so that it is once again consistent across any other elements that you plan to also rotate. 

Flipping Text With Clip Studio Paint

Now, another way to change how text looks is to use a method to flip it. The software will flip the text across either the horizontal or vertical access, allowing you to be able to make simple changes. 

This is especially useful when you want to create text that is readable in front of a mirror. So, to create this effect, follow these instructions:

1. Launch Clip Studio Paint, and then open up the file you want to edit.
2. Select the text layer you want to edit to get started.
3. Now, click on the handle in the middle of the box.
4. Drag it down to flip the text down the center.

Your text will now be flipped! You can also make the same changes through the ‘Sub Tool Detail Palette’ in Clip Studio Paint. 

You can choose between Flip Horizontal and Flip Vertical. This will allow you to create the flip without altering where the text is placed in the document.

Final Thoughts

With this article in mind, you now know what you need to do in order to have a rotated or flipped text box when using Clip Studio Paint! 

We hope this article helped you make changes and you can now make simple changes to your work that can make all of the text elements stand out! Best of luck and remember to practice to get a feel for these tools!