After using Adobe Photoshop, did you find it difficult to shift to Adobe Illustrator once you discovered you couldn’t rotate the canvas?  Even when you didn’t use Photoshop beforehand, having the ability only to rotate the artboard was a problem. But Illustrator now offers the option to rotate the artboard.

“Rotate View Tool” should be selected from the toolbar. To switch the orientation of the artboard, pick the tool by pressing Shift + H and dragging it across the page. To switch between the angles, use the gadget displayed when you rotate the canvas.

Keep reading below for more information.

How To Rotate An Illustrator Artboard

There are two ways to accomplish this, and we’ve discussed both of them here.

For more information on how to rotate an Illustrator artboard, watch this video below:

Using Rotate View Tool

To use the rotate view tool, follow the steps below.

Step 1: Create a New Document in Adobe Illustrator

1. Start a new document by selecting the “Create New” option in Adobe Illustrator. The “New Document” box will appear; select the canvas size from there.
2. The canvas size in this lesson is set to 1920 by 1080 pixels. Give your file a name, choose the “Width,” and repeat for the “Height.” Select “Create” to get started.
3. Control (CTRL) + N (Windows) or Command + N (MAC) is the keyboard shortcut for launching a new file.
4. Additionally, you can utilize any existing document. Select the file by clicking the “Open” button.

Step 2: Draw

You can ignore this step if you want to utilize an existing image. 

1. Draw a subject, a few lines, or even a complete piece of art after creating a New File. The “Paintbrush Tool” (abbreviated “B”) can be used in the tutorial to create the lines. Be imaginative; it doesn’t have to be flawless.

Step 3: Select Rotate View Tool from the Toolbar

1. The “Edit Toolbar…” option with three dots is located at the end of the Toolbar. The menu, including all the tools, will appear once you press on it. 
2. Drag the chosen tool to the toolbar, in this example, the “Rotate View Tool.” That’s how easy it is. The amount of tools you can put on your toolbar is unrestricted.

Step 4: Choose the Rotate View Tool

1. Pick the tool by looking for it in the Toolbar. If it wasn’t put there by you, it was probably put there alongside the “Hand Tool.”
2. Shift + H is the keyboard shortcut for the “Rotate View Tool.”

Step 5: Rotate the Artboard

1. Once you’ve chosen your tool, select any location on the canvas and drag it there until you get the outcome you want. 
2. Repeat the method if you’re not happy with the initial round until you are satisfied. 
3. The gadget will emerge as you move the canvas, and switching between different perspectives will be simple.

Step 6: Save the Rotated View

1. You may keep the rotation as a pre-set when you are satisfied with the results. 
2. A window will appear after selecting “New View” from the drop-down option under “View” in the menu bar. 
3. Select the view’s name and click “OK.” 
4. Click “View” and choose the preset view to reapply it.

Step 7: Reset the Rotated View

There is a technique to restore the canvas rotation from the initial rotation if you have reconsidered and prefer it now. 

1. All rotation modifications will be undone if you select “View” in the menu bar and choose “Reset Rotate View.”
2. Shift + Control (CTRL) + 1 (Windows) or Shift + Command + N (Mac) is the keyboard shortcut to activate “Reset Rotate View.”

Using the Hand Tool

You can use the hand tool to rotate an artboard by following the steps below.

Step 1: Choose the Hand Tool

Although it may also be utilized to rotate the canvas, this feature is primarily utilized to rotate the canvas. 

1. Find and pick the “Hand Tool” from the toolbar. 
2. Utilize the shortcut key by hitting the character “H” on the keyboard to access the tool easily.

Step 2: Rotate the Canvas

1. Ensure that the tool is chosen. 
2. The “Hand Tool” will change to the “Rotate View Tool” when you click and press Space and Shift together until you release the keys. 
3. Drag and move the canvas while holding the keys to get the required angle. 
4. Repeat the procedure if the initial rotation didn’t meet your needs. 
5. The gadget will emerge as you drag the canvas, making it easy to switch between different angles.

Conclusion

This tutorial covered two easy methods you can follow to rotate the artboard. It’s something that every professional should know about. We hope the instructions in this article will prove useful when you set out to do your own editing.

It is instinctive to rotate the paper you are drawing on when you wish to draw your lines more clearly. Drawing upward and downward is far more difficult than drawing sideways. The same holds while working with photos in Adobe Photoshop when drawing with a cursor. For improved sketching and brush strokes, it is thus highly useful to know how to rotate the Photoshop canvas.

Photoshop allows us to rotate the canvas through a built-in tool called the Rotate View tool. All you have to do is open the image, select the tool, and rotate the view by clicking and dragging it inside the document window.

Keep reading below for more information.

Why Use the Rotate View Tool?

Instead of rotating the picture itself, this tool rotates the canvas that contains it. Instead of the artwork itself, you may think of it as spinning the paper below the drawing.  What makes this difference so crucial?

Because rotating the picture is a destructive modification (not the canvas). Photoshop must redraw the pixels to match the new appearance each time you rotate the picture. As a result, information is lost. If you repeat this often enough, the image’s quality will deteriorate.

However, turning the canvas that is hidden behind the picture does nothing. Its rotation won’t impact the image, no matter how many times you do it.

How to Rotate Canvas in Photoshop

Follow the instructions listed in this section to rotate your canvas in Photoshop successfully.

For more information on how to rotate a canvas in Photoshop, watch this video:

Step 1: Choose Tool

1. The Hand Tool and Rotate View Tool are included on Photoshop’s toolbar. The Rotate View Tool is normally hidden behind the Hand Tool, the standard tool shown.
2. Press and hold on the Hand Tool’s symbol till a fly-out option displays to pick the Rotate View Tool. 
3. Select the Rotate View Tool from the menu after that. R is the keyboard shortcut for the Rotate View Tool, as you’ll see.

Step 2: Rotate the View

1. The simplest approach to rotating the view of the picture while the Rotate View Tool is chosen is to just press and drag within the current document. 
2. Using the Rotate View Tool, select the picture while continuing to press the mouse button. In the middle, a compass may be seen. 
3. Even if you rotate the angle, you can always tell which direction is up since the red direction arrow at the head of the compass always leads to the real top of the image.
4. Hold the mouse button down while dragging the picture to rotate the view. You may drag in either a clockwise or anticlockwise direction. 
5. As you rotate the perspective, you’ll see that the compass still points to the real top of the picture. 
6. Photoshop, by default, allows you to easily rotate the angle. However, if you drag while holding down the Shift key, the display will rotate in 15-degree steps.

Apply a Specific Rotation Angle

1. If you are certain of the precise angle you want, you may type it into the Rotation Angle box in the Options Bar without any additional input. 
2. You may change the angle by typing a new number after clicking inside the box to highlight the existing angle. Photoshop will instantly include the degree symbol (°), so don’t stress about that. 
3. To confirm it, hit the Enter (Windows) or Return (Mac) button on your keyboard. The updated value can also be highlighted by pressing Shift+Enter (Windows) or Shift+Return (Mac). Doing this allows you to swiftly type in various directions without repeatedly clicking inside the box.

Using Scrubby Slider to Apply Angle

1. Utilizing Photoshop’s Scrubby Slider is yet another approach to rotating the view of the picture. Directly place your mouse pointer on “Rotation Angle” in the options bar. 
2. The pointer will transform into a hand icon featuring left and right facing arrows. This is what the Scrubby Slider looks like. 
3. The rotation angle may be changed by clicking and dragging to the right or left. The default setting is to change the angle in 1-degree steps. To adjust the angle in steps of 10 degrees, slide the Scrubby Slider while pressing and holding the Shift key.

Step 3: Reset View

1. Select the Reset View option in the Options bar to reset the view and return the picture to its upright orientation. 
2. Alternatively, use your keyboard’s Esc key. 
3. By doing a double-click on the Rotate View Tool inside the Toolbar, you may easily reset the view.

Match Rotation

What happens if you want to rotate several pictures at once? This may be implemented quickly with a single command.

1. Ensure that Photoshop is open and contains each of the images you wish to rotate. Select the one whose rotation angle best matches your requirements.
2. Hover over Arrange in the top bar under Windows. Next, select Match Rotation. The other photos will also rotate at the same degree.

Conclusion

This article discussed how to use the Rotate View tool to rotate the canvas in Photoshop. It’s a really useful skill when you’re designing your artwork, so make sure to check it out for yourself. Happy editing!

One of Photoshop’s most effective tools is the ability to build layers, which are essentially discrete informational slices that may be stacked or rearranged to generate the structure of your image. You can draw, edit, paste, and rearrange components on one layer using layers without affecting the others. So, how do you rotate a layer?

You can rotate layers in Photoshop in a couple of ways. If you wish to rotate freely, then you may simply drag around the blue box. If you want to rotate at a precise angle, it’s better to use the Transform tool.

Keep reading below for more information.

What Are Layers In Photoshop?

Information about the many components of a picture is stored using layers. All distinct aspects of the image, such as the backdrop, a picture, text, or a form, can be contained in each layer.

The ability to modify each layer independently provides you a great deal of control over the final product. To observe how various components of the image work together, you may also toggle layers on and off.

Moving Layers In Photoshop

As you are aware, the look of your picture is affected by the way in which layers are placed. It’s crucial that you understand how to move layers so that you may adjust their arrangement as necessary.

1. Choose the layer or layers you want to move.
2. Drag the layer to the appropriate location by clicking and holding down the mouse button. Across layers, a thick line will show to highlight where the layer would be placed.
3. Release your mouse button when the layer is at the desired position and it will go there.

Rotating Layers In Photoshop

By following the steps in this section, you may rotate layers in Photoshop.

For more information on how to rotate layers in Photoshop, watch this video below:

Step 1: Choose the Layer

1. Simply press on a layer in the Layers Palette to pick it. When a layer is chosen, it will change color to blue.
2. Holding down the CMD (Mac) or CTRL (Windows) key while clicking on every layer you want to have chosen will pick multiple layers. Pick the first layer, press and hold the SHIFT key, and choose the last layer to select many of them in succession.

Step 2: Rotate the Layer

From here, rotating is really simple. There are various approaches you may take.

1. Hovering the mouse over the blue box’s exterior edge is one technique. It will change into a bent arrow as you watch. Rotate the layer by clicking and dragging.
2. The picture will progressively rotate in 0.1-degree steps under the usual configuration. If you rotate while pressing the Shift key, the layer will hop in 15-degree intervals instead. Additionally, you may select a precise angle by typing it in the angle box located above the options bar.
3. Utilize the transform tool if you’re trying to rotate at a predetermined degree. Press Command + T (Mac) or Control + T (Windows) while your Move Tool and layer are still chosen (PC).
4. To view your transform choices, use a right-click inside the transform window. Rotate 180°, Rotate 90° Clockwise, and Rotate 90° Counterclockwise are all listed at the end of this menu. 
5. The Transform tool isn’t in use if, after you right-click, you see the small drop-down box beneath. Use the keyboard shortcuts Ctrl + T or Command + T to enable it, or click and drag to slightly rotate the picture.
6. To confirm the adjustments, press the Enter key after you are satisfied with the placement.

Flipping Layers in Photoshop

Layers in Photoshop may be flipped horizontally or vertically, similar to the artboard.

1. To accomplish this, choose the layer you wish to flip, then click V to pick the Move Tool.
2. Now hit Command + T (Mac) or Control + T (Windows) to launch your Transform Tool.
3. Right-click inside the transform window when the transform tool is active and pick “Flip Horizontal” or “Flip Vertical.”
4. To confirm the modifications, flip your layer and hit Enter or tick the option in your preferences bar.

How to Export and Save Your Work

After rotating your image, you’ll presumably need to save it.

1. Go to File > Save As save the image.
2. Select the correct format for your picture after deciding on a folder and title.
3. Save your picture in the “Photoshop” format if you want to save it as a document with an access point.
4. Save your work in the “Jpeg” format if you wish to export it as a JPEG.

Conclusion

There are several methods to rotate an image in Photoshop. Fortunately, everything is in one location, making it simple to browse. You can discover the ideal rotation options for you, regardless of whether you want to use a preset option or create a custom one.

Did you accidentally create a spectacular color swatch you do not want to let go of? What if we told you that you could use the swatches again, possibly in every new document you create? Yes, let us get into how you can save the colors. 

To save a color swatch for the same document, select the swatch, go to the Swatches panel, and click the icon that looks like a plus sign. Name the color whatever you want in the window that pops open. To save multiple colors and create a palette, select all the colors on the canvas and go to the Swatches panel. Here, click on the icon that looks like a folder. Name the palette in the window that appears.

Please continue reading this article to get into further details and learn more about saving color swatches in Illustrator. 

Turn on The Swatches Panel In Illustrator

Before we begin saving color, we must ensure that your Illustrator is perfectly equipped for the process. One major prerequisite for us is displaying the Swatches panel on the right side of the screen. 

To get the Swatches panel to show:

1. Open up, Illustrator.
2. In the top panel, go to Windows.
3. In the drop-down menu that appears, select Swatches.
4. The swatches window will appear on the right side of your screen above the layers panel. 

Save A Color For Use In The Same Document

If you wish to continue using a color you created in the document you are working on, you can save it in the Swatches panel and return it when needed. This swatch will not be available for use in any other document. 

To save a swatch:

1. Make a swatch that you wish to save.
2. Select the swatch by clicking on it.
3. Now, go to the swatches panel on the right side of your screen.
4. Click on the icon, which indicates creating a new swatch. This icon looks like a plus sign. 
5. A window will appear. Name your swatch here and click OK.
6. This swatch will be available in the document while you work on it. 

Save A Color For Future Use In Illustrator

To save the same swatch for future documents, follow these steps. 

1. Make a watch and then select it in Illustrator.
2. Look for the “Swatch Libraries Menu” icon in the Swatches panel. 
3. Click on the icon, and click on Save Swatches in the drop-down menu that opens.
4. In the window that appears, name the swatch and click Save. 

How To Save Multiple Colors In Illustrator

You may have more than one color you wish to keep for a document. To save multiple color swatches:

1. Open the document.
2. Swatch all the colors that you wish to save. 
3. Please select all of them by dragging your cursors across them and making a selection. 
4. Go to the Swatches panel on the right side of your screen now. 
5. Click on the icon that indicates New Color Group. The icon looks like a folder. 
6. In the window that opens, name the group of colors or the color palette. 
7. Click OK.

How To Save A Color Palette For Future Use

You would not want a color palette that you curated to go away. It may be a good idea to save it for future purposes. 

To do so:

1. In the same document, go to the color palette you created in the Swatch panel.
2. Select each swatch and click on the icon representing the Swatch Libraries Menu.
3. In the drop-down menu, choose Save Swatches. 
4. A window will appear. Name the color palette here to what you prefer. 

For a guided tutorial, watch this Youtube video:

Using Color Swatches Or Palettes In The Future

You have saved the swatches and palettes for future use, but they still would not show in the Swatches panel. To be able to use the custom colors and palette, follow the instructions given below. 

1. Open up a new document in Illustrator. 
2. Enable the swatches panel.
3. Go to the icon that represents the Swatch Libraries Menu.
4. Scroll down to the option that says User Defined. Click on this. 
5. Another drop-down menu will appear. 
6. All the saved swatch names are present here. Look for the one that you saved earlier and click it.
7. The swatch will appear in the swatches panel now. 
8. To use it, click on the color.

Conclusion

Making colors, in itself, is a highly complex process that requires focus and repetition of tasks. To save all the progress you make through this process, we have made sure that our guidelines are simple and easy to follow.

Often pixel art needs resizing to fit into specific images like thumbnails or posters. If you cannot find a way to do this in Photoshop, let us help you out. 

To resize pixel art in Photoshop manually while preserving the quality, select your object, hit Ctrl + T, and in the top panel in front of Interpolation, choose “Nearest Neighbor.” Now manually drag the corners of the image to adjust to your liking. 

We discuss two other ways to do this in this article. Continue here if you are interested. 

Resize Pixel Art Manually In Photoshop

The method we are about to dive into is one of the easiest and most hassle-free. It is so easy that any beginner could manage to pull it off. However, it has some cons, which we shall discuss further in the article. This method works best when you are just starting, but it is not recommended for professional work. Moreover, quality issues often need to be met when resizing involves reducing the size of the art. 

To resize pixel art manually in Photoshop:

1. Click on the image.
2. A square would appear around the image showing handles on all four corners.
3. Press and hold the Shift key while dragging one of the handles from the corner. Depending on whether you wish to increase or decrease the image size, you can drag this inwards or outwards. 
4. Keep dragging, and when you are satisfied, release your cursor. 
5. The image will be resized. 

Resize Pixel Art To Preserve The Quality In Photoshop

The method we showed you above may be easy to perform, but it could be better for pixel art. We will look into methods that help us preserve the art’s quality. 

Why Is Preserving The Quality Of Pixel Art Important In Photoshop?

A medium such as a pixel art requires the preservation of quality. It is essential for creating artwork that looks sharp and professional. Pixel art is digital art created using pixels, the individual points that make up an image. 

It is often used to create video game sprites and digital art. When the quality of a pixel art image is preserved, it ensures that the image looks crisp and clear, making it look more professional. Quality preservation also helps to ensure that the details of the image are retained.

Resize Pixel Art Manually To Preserve Quality

Let us first correct the method mentioned above to keep the resolution crisp. You will still be able to resize the image manually as per your preference, but if the size is increased, the quality will stay the same. 

1. Select the art. 
2. Now hit Control + T or Command + T.
3. In the panel on top, click the tab next to Interpolation.
4. In the dropdown menu, choose “Nearest Neighbor.”
5. Now drag one of the handles at the corner of the selection and click enter when you are done. 
6. The image will resize, and the quality will be preserved. 

For a tutorial, watch this video: 

Resizing Pixel Art With Specific Dimensions To Preserve The Quality

For accuracy, you can resize the image according to a specific dimension that you have been provided. To do so:

1. Open up your pixel art in a separate layer.
2. Please select it and go to Image in the panel on top. 
3. Here click, Image Size. 
4. For a keyboard shortcut, press the Alt + Control + I keys together in Windows. On a Mac, press the Option + Command + I keys together. 
5. A window will open, showing you the image’s dimensions, including width and height. 
6. Go to the first section labeled Pixel Dimensions. 
7. In front of the width columns, ensure the Pixels option is selected as the unit of measurement. 
8. Now input the number in the tabs next to Width and Height. 
9. At the bottom of this window, look for a tab that shows a dropdown menu. 
10. Choose “Nearest Neighbor (preserve hard edges)” in the menu.
11. Click OK. 
12. Save the image as you like. 

How To Resize A Document In Photoshop

Along with the option of resizing the art comes the option of resizing the document. We will touch upon this. 

To resize the document:

1. Open up the document that you wish to resize.
2. Go to the top panel and select Image. 
3. In the dropdown menu that opens, choose Image Size.
4. A window will pop open. Go to the Document Size section of the window. 
5. Here you will see options for width, height, and resolution. 
6. In the width and height options, you can change the unit of measurement as you like. If you do not understand pixels, you could go with inches, millimeters, or centimeters. 
7. You can adjust the resolution according to your demands in the resolution option. 

Conclusion

If you are starting with pixel art, we recommend sticking to the first method and slowly moving toward the next two methods. The slow progression will make things easier without making the experience difficult.

We’ve all struggled with this – having an amazing picture ruined by red eyes. One would hope there is an easy way to get rid of this problematic image issue, and luckily there is one! You can use Photoshop to fix all red eyes – but how does this work?

Adobe Photoshop comes with a built-in red eye tool that can help you repair red eyes in photographs within seconds! All you need to do is apply this tool from the Healing Brush option and make sure it takes care of the problem!

If you want to fix one of your pictures, or a picture of someone else, you are reading the right resource – join us as we explore what happens to cause this issue in the first place and how you can use a tool like Adobe Photoshop to take your pictures back to normal!

How To Fix Red Eye In Adobe Photoshop

So, you’ve taken an amazing picture, but the red-eye effect is ruining the impact. What can you do? If you have Adobe Photoshop lying around, there is a perfectly easy method to take care of this issue. 

In fact, you can get it done in just a few seconds! So, if you want to repair your photos, start by following these steps:

1. Launch Adobe Photoshop on your preferred device.
2. Open up the image that you want to edit.
3. Now, click on the Patch Tool on the toolbar on your left. 
4. You can also use the keyboard shortcut J to access this tool.
5. Hold down the tool so you can see more options in the menu.
6. From here, select the option ‘Red Eye Tool.’ This will be at the bottom of the list. 
7. Now, go back to the image, and click in the center of the eye using the tool.
8. As a result, the red eye of the subject will be removed and fixed.

Now that you have done this, you will notice that the red-eye effect will be gone. However, this can sometimes leave the subject’s eyes lighter or colored differently than what you are looking for. In that case, you can manually replace the color on the image. 

This can be done in many different ways. Some people use the Burn Tool; others will use a different brush or even play around with selecting the area and changing the exposure and the lighting. Whatever works for you is probably best in this situation, as it is a minor tweak. However, doing it right can make a huge difference. 

If you want to see how simple and easy this process is, why check out a quick video tutorial to catch this amazing Photoshop tool in action?

Here is a video: Photoshop Red Eye Removal | YouTube Video Tutorial Link

Why Does The Red Eye Effect Happen?

You might be wondering – what exactly causes this effect to happen in the first place? The answer lies in how light bounces in and around the eye. 

When light falls in our eyes at a specific angle, it bounces from the back of the eye – an area known as the retina. This is most common when the camera flashes faster than the pupil can react.

Because the inside of our eyes is red, it gives a red look that can seem quite jarring in photos. You may have seen the same effect when the subject is an animal – the principle of action is exactly the same here. 

Luckily, there is a quick and easy way to take care of this effect, and with modern cameras, you are likely to come across it less often.

Nevertheless, flash photos are back in fashion, so it’s not too out of the norm to see a red eye photo every now and then. The good news is, you now know how to take care of it with just a few steps using Adobe Photoshop, and can repair any image to make it work!

Final Thoughts

No one wants to see their eyes glowing to a menacing red when their images are taken. However, if that has ever happened to you, you now know a quick way to take care of the issue without further complications! Keep trying this method to get it to work right; you will now be able to use all of the photos you have taken!

Blue lines can sometimes be seen when you are working in Photoshop. But what are they? These lines are known as guides and help you to edit your design elements keeping in mind things like placement and alignment. While they serve a purpose in keeping your work clean and precise, they can add an element of distraction to your work.

Blue lines, such as grids and guides, can easily be removed from your screen on Adobe Photoshop. All you will need to do is to go to the View tab on the top menu, and then clear the guides. You can also selectively remove individual guides if you want to keep some available to give you a general idea of the spacing of items. 

Grids and guides are an important part of work using Adobe Photoshop. But, if you are tired of seeing these lines when you no longer need them, you may be looking for a way to get free from them looming over your work area. If that is the case, then you are in the right place! Follow the tutorials in this article to achieve this result!

How To Take Out The Blue Lines In Photoshop

A series of blue lines is one of the most common things you may encounter when using Photoshop. These are guides and grids, which have a useful role in helping you understand spacing and alignment as you work. However, there is a nifty way to remove them if you find their presence distracting and want to focus on your work.

Removing All Guides At Once Guides

When you use Adobe Photoshop, you can use a very important tool to ensure all design elements line up. This is called the guide, a line you can create to signify a certain measurement on your canvas. You can create guides in a number of different ways – either by dragging them from the ruler, or by manually setting them.

Either way, there are times when grids can be a bit too much. In that case, you will want to take them out altogether. In this case, there are two methods to make this happen. The first one involves this method.

1. Open up Photoshop, and open up the file you want to edit.
2. Click on the View menu at the top of your Photoshop menu bar.
3. From here, select the option ‘Clear Guides.’

There are other ways to make this happen too. For example, you can also use a keyboard shortcut to complete the same process. In this case, you must press Control (or Command on macOS) and then hold down ‘;’. This way, all of the guides will be removed from the canvas, and you can get back to work without distraction. 

For more information on how to remove guides when using Photoshop, so they no longer obstruct your view, you can also take a look at this tutorial:

Removing Just One Guide At A Time

Maybe, you want to keep using the guides available on Photoshop but want to be able to remove a couple that is no longer necessary selectively. You can use the method above, but that will mean adding all the necessary guides again.

Luckily, there is a process that you can use just to get rid of the few guides you want to remove. To do so, you will need to use this method. 

1. Open up the file using Adobe Photoshop.
2. Look for the guides that you want to remove from your file.
3. Hold down the guide that you want to remove.
4. Now, drag it out until it reaches the ruler on your canvas towards the left.
5. As soon as the guide touches the ruler, it disappears. 

This process is pretty easy, but time-consuming! It is recommended that you use it only when you need to get rid of just a few guides. 

Final Thoughts

Getting rid of the unnecessary guides or blue lines on your canvas will help you get the clean canvas you are looking for. Now that you know how to do this in just a few steps, you can start your next amazing Photoshop project! Good luck, and remember to keep practicing what you have seen so you can excel!

Removing background in Photoshop Elements can be an easy way to create a graphic that can be used in multiple ways. Many people who use Photoshop Elements wonder if this is something they can do with the tool. So how can you remove the background in Elements?

When you want to remove the background of any image on Photoshop Elements, you can do so using the selection tool. By selecting what you want in your transparent image, you can then create a layer mask that will ‘remove’ the background and leave the image completely transparent and you can even add new background.

If you are looking to remove the background of any image in Photoshop Elements, then you are in the right place! Keep reading this article for more information on how to create a transparent image and the process you need to follow to make this happen!

Removing The Background Using Photoshop Elements

Are you looking to change up the background of an image using the Photoshop Elements software? If that is the case, you can achieve this result using these steps:

1. Launch Photoshop Elements on your preferred device.
2. Switch to Expert Mode on Photoshop Elements.
3. Open up the image you want to edit on your Photoshop Elements software.
4. Use a selection tool to select the area you want to keep in the layer.
5. Choose between the Polygonal Lasso Tool Lasso Tool to make the selection.
6. Use the Refine Edge Tool to clean up your selection further.
7. Use The Zoom Tool within the Refine Edge menu to close up and clean any leftover spots that are still selected or unselected. 
8. Once you are happy with the selection, under the ‘Output’ setting, you can choose what you want to output the selection to, from the dropdown menu.
9. If you want to create a layer mask, choose ‘New Layer With Layer Mask.’
10. You will now have the image without the background available in Elements.

With all these steps, you are ready to start creating your own transparent images! You can now create your own image assets, such as stickers, backgrounds, and even images that you can later sell! 

If you want to see a video tutorial showcasing this entire process, you can check out this look at how to create a transparent image in Photoshop Elements:

Selection Tools In Photoshop Elements

Including the two tools mentioned in the tutorial above, Photoshop Elements includes a number of selection tools that you can use depending on your needs from the image. Suppose you are interested in selecting various elements in your images. You can find most of these selection tools within the Tools panel on the left of your Photoshop Elements screen!

• Rectangle Marquee Tool: this is the tool you should use when you select something that can be encompassed in either a square or a rectangle. 
• Elliptical Marquee Tool: with this tool, you can select areas that are either circular, or in the shape of an oval or an elliptical area. 
• Lasso Tool: this tool helps to create freehanded borders that are precise and easy to select complicated areas that may be rounded.
• Polygonal Lasso Tool: works best as a tool when you have a subject that needs to be selected but has straight edges that can create a polygon form.
• Magnetic Lasso Tool: creates a magnetic border that snaps towards the edges of your subject as you drag over the subject area. 
• Magic Wand Tool: This tool selects all of the areas on an image that is in one color. 
• Quick Selection Tool: Select an area on the basis of color and texture when you drag over the image with your subject.

As you can see, there are many different ways to select items in Photoshop Elements! Make sure to experiment to find the perfect tool for your subject. 

Final Thoughts

Getting a transparent image requires practice and time as you learn to finesse it, especially when looking at subjects with complicated borders, such as hair or fur. However, with a little practice, you can make your images shine by making them into a transparent PNG! We hope this article was helpful in aiding your next project!

What good is a perfectly edited and color-graded picture when the skin is not natural and flawless? If you have a reference picture that you wish to match the skin tone of your image to, we are here to help you achieve the look.

To match the skin tone, you would need to sample the skin tones, match the RGB values, paint over the image to reveal the effect, and then admire the work you just did. 

Let us get into the details of how to accomplish this. 

Place The Images Together

The first and most important step is to place your reference image and the subject image in the same frame. This is an optional step, but it provides ease. 

To do so:

1. Open up the two photos which you wish to match the skin tone for.
2. Drag the image for your reference and take the cursor on top of the tab of the other image. The tab will be switched.
3. Now drag the cursor on the canvas and place the reference image on top of the image that is to be edited. 
4. Adjust the orientation for easier use. 

Create A Blank Layer

Next, you need to create a blank layer for your swatches. To do so:

1. Go to the layers panel.
2. Create a new layer.

Set The Sample Size For The Eyedropper Tool

The sample size for the eyedropper tool determines how many pixels are sampled at the moment. To set the sample size for the eyedropper tool:

1. Select the eyedropper tool from the tools panel.
2. In the control panel on top, choose a sample size of five by five.

Choose The Two Skin Tones And Create Swatches

1. Select the eyedropper tool and choose an area that is not a highlight, nor a shadow, from the reference image.
2. Select the brush tool and paint a swatch on the blank layer we made earlier. 
3. Repeat the process for the image that is to be edited. 

Create A Curve Adjustment Layer

This step is important to adjust the skin tones on the face without affecting the rest of the image. 

To select the face:

1. Select the Lasso tool.
2. Outline the face on the image to be edited.
3. On the bottom of the layers panel, go to settings and choose “Create Curves Adjustment Layer.”

To begin the curve adjustment process:

1. Click on Curves Adjustment Layer.
2. Go to the eyedropper tool and choose the “Color Sampler Tool.”
3. Now click on the swatches we made.
4. First, click on the swatch from the reference picture and then the swatch from the subject picture.
5. An info panel will pop up. The RGB values for both swatches will be displayed. 

Match RGB Values

The RGB values we set for our curves need to be matched for both images. We will use the info chart as a reference. 

To do so:

1. Keep the curves adjustment layer on top of the layer stack.
2. Go to your curve and delete any points that may already be present. 
3. To create points on the individual RGB channels, hit Ctrl + Shift or Command + Shift.
4. Now click on the swatch of the subject image. 
5. This will add points to the individual RGB channels. 
6. Now go to each RGB channel and manually match the values from the Info chart into the “Output” section. 
7. Once done, go to the RGB composite curve and adjust brightness and contrast as you wish. 
8. Delete the layers for the swatches and the reference image. 

Paint The Skin Tone That You Created On The Entire Image

The selection you made with the Lasso tool needed to be revised. You must use the brush tool to achieve a clean look, zoom in, and paint into the image. 

1. Go to the layer with the curve adjustments. 
2. Make the layer mask completely black by selecting the layer mask and hitting Control + Backspace or Command and Delete. 
3. Select the Brush Tool and paint with white in all areas where the skin is showing. 
4. You are done!

You can follow the tutorial on this Youtube video to add skin tone effects with less accuracy and control: 

Conclusion

Well, that was pretty easy. It is okay to struggle on your first attempt, but we assure you this seems easy after a few tries. Your first attempt at matching skin tones may turn out poorly, but keep going; refer to this detailed guide for assistance. We are vouching for you!

In a saddle-stitched brochure, which is folded and stitched on the folding, there are normally two pages on every page of the paper, indicating that the booklet has printing on both sides of every page. It is necessary to paginate an InDesign document such that the front cover and rear cover are joined, as well as the inside front cover and inside back cover.

To print a booklet in InDesign, open the document and go to File > Booklet. When the Print Preset window appears, choose “Default.” Choose your booklet type. Select Printer Settings at the bottom of the window, and enter the parameters. Click OK once the adjustments have been made.

Keep reading below as we detail these steps in the next sections.

InDesign Printer Spread for Printing a Booklet

You need to be able to create a printer spread in InDesign to put together a booklet that can be printed at a high standard. For instance, the pages of an eight-page booklet would display in the InDesign layout window sequentially. 

Page 1 is placed next to page 8 if printed as a printer spread; page 2 is placed next to page 7, and so on. By doing this, the pages will be printed on a single sheet, folded, and combined so that they are all in the right order to read.

 InDesign’s standard Layout Spread, where the pages are arranged consecutively, makes it simple to work this way right before you can use the Printer Spread.

How To Create A New Booklet

You may use the straightforward steps in this section to create a new booklet.

1. Select File once InDesign has opened. Then, choose New, open a Document, enter the number of pages, and finally click Finish.

2. Next, choose Facing Pages to display left- and right-hand pages in your InDesign file.

3. Select the page size. We are utilizing Letter – Half for this project (5.5″ x 8.5″ for Page Size) for the purpose of this project. Change orientation to Portrait to properly configure the page orientation.

4. You need to determine your margins. Select .5″ everywhere throughout under “Setting the Margins.”

5. Choose Type 1 under “Number of Columns.”

You’re now ready to begin constructing your Indesign booklet at this point. To finish setting up the InDesign booklet and start working on your document, click Create.

Your InDesign booklet is finished, and you may print it now. Once you’ve set up and worked on your Layout Spread, the steps below show how to print it as a booklet.

How to Print a Booklet

To print a booklet from InDesign, follow the instructions listed in this section.

For more information on how to print a booklet in InDesign, watch this video below:

1. Open your project in InDesign and select Print Booklet from the File menu.

2. Choose Default from the Print Preset drop-down menu. Decide on a type of booklet. The 2-up Saddle Stitch is advised for this tutorial.

3. Choose Print Settings from the window’s bottom menu. From the left hand column, select Setup. Confirm the page alignment and paper size. In order for this to be in the US Letter landscape, two half letters must be placed side by side.

4. If you don’t want to cut your printed booklet, uncheck the boxes next to Marks and Bleed in the menu.

5. Scroll to the bottom of the window and select Printer. Go to Show Details > “Two Sided.” Then, select Layout and pick Short Edge Binding. Then choose Print to put those changes into effect (the print function has yet to be activated!).

6. In the second Print box, click OK to complete the settings (still won’t submit to print!).

7. To confirm the formatting, choose “Preview” in the left column of the “Print Booklet” box.

8. Confirm again that your preview seems to reflect exactly how you intend your booklet to print. After you’re happy, click “Print.” 

How to Export Booklet to PDF

Although this is a straightforward procedure, InDesign does not provide the option to convert the booklet to PDF. Hence, it is something that needs to be carried out when utilizing a PDF application like PDFelement. 

The booklet may be printed using a postscript file. The file may then be converted to a PDF using Adobe or PDFelement.

• Select “File” > “Print Booklet,” then configure the options as necessary. The options for the preview and summary are also included.
• Select Print Settings from the list of options at the bottom of the dialogue window. Choose the postscript file format. 

It is advisable not to alter the other parameters because the printer has already specified them. If the printer has been replaced, only the settings for the new device should be altered.

• Click OK after making the necessary print settings.
• Your computer will now store the postscript version of the PDF. Use the “File” > “Create” > “PDF from file” menu option in Adobe Distiller.

After that, the Illustrator file will be transformed into a PDF file.

Conclusion

This article discussed how you could easily print a booklet from InDesign with just a few simple steps. Now that you have learned how to do so, you can employ this technique in future projects. Happy editing!